With the continuous changes of the market, there are more and more materials. What are the categories and main types of the market? The following small series will explain to you:
First of all, carpets can be divided into the following categories according to different materials:
1、 Pure wool carpet: wool carpet, including handmade wool carpet, woven wool carpet, non-woven wool carpet, etc. Pure wool carpet has soft texture, is not easy to produce insects, has large elasticity, strong tension, sufficient luster and outstanding texture. It is suitable for luxury houses and hotels. Wool carpets are mostly hand woven. Their warp and weft adopt double warp and double weft yarns. They are often divided into 90, 100, 110 and 150 tracks with the number of warp and weft of one foot wide. The more tracks, the higher the density of the carpet, the better the quality. They are mostly single sheets without backing.
2、 Blended carpet: there are many varieties. It is often blended with wool fiber and various synthetic fibers. For example, 20% nylon fiber is added to 80% pure sheep fiber. The purpose of 70% wool plus 30% dilute propionic acid fiber is very similar to that of pure wool, but it can overcome the shortcomings of pure wool carpet, such as easy corrosion.
3、 Chemical fiber carpet: it is also made up of synthetic fiber carpet. It is made of polypropylene, acrylic (polypropylene acrylic), cotton and polyester as raw materials, woven into a surface layer, and then processed with linen or rubber
Carpet as a warm material in decorative materials, The effect of setting off the atmosphere is that the high-grade materials in the floor decoration have the characteristics of sound insulation, soft and comfortable heat insulation, gorgeous color and so on. However, if you choose the carpet after improper paving, you will not only fail to achieve the expected effect, but also have problems such as different color depth, carpet bulging and so on, which will greatly reduce the decoration effect of the carpet. However, if you construct according to the method we teach you, you can effectively avoid it Avoid the occurrence of the above situation
I. precautions:1. The basic surface error shall be less than 4mm and the moisture content shall not be greater than 8%. The surface impurities shall be removed and the base course shall be kept flat, dry and clean.
2 carpets shall not be laid on the ground wetted by rain or soaked or penetrated by groundwater.
3. The carpet rubber pad shall be fully paved on the base course, and a layer of paper blanket shall be paved before laying the strand pad to prevent the floor pad from sticking to the ground.
Two barb plate fixation:Fix the barb board on the base course with cement nails along the edge of the skirting board, with a spacing of 40cm, and press the carpet surface with aluminum alloy strip at the door.
Three carpet seam:Put the cut carpet on the cushion for splicing. Pay attention to straighten out the carpet fluff to make the fluff on the surface consistent and backlight, and then sew the carpet. After sewing, stick the carpet with hot tape at the suture.
Four stretch fixation:First fix the long edge of the carpet on the barb, cover the rough edge of the carpet under the foot board, and use the carpet support to push and extend the carpet section by section in the vertical and horizontal direction, so as to tighten it, and fix it on the barb board or strip
V. finishing and cleaning